Establishment and Office: Z.I. Piano lago 87050 Figline Vegliaturo (CS) Italy Tel. +39.0984.980826 Fax +39.0984.980827

The Standard panels are forecut with angles of 45 degrees all along their length in order to facilitate the construction of the ducts.

length 3.000 mm - thickness 20 mm

CODE

MISURA

  Int. (mm)

M²/Pz.

  Lit./pz  

 euro/pz 

Pz.

C20ST0150

150

0.57

10

C20ST0200

200

0.72

10

C20ST0250

250

0.87

10

C20ST0300

300

1.02

10

C20ST0400

400

1.32

10

C20ST0500

500

1.62

10

C20ST0600

600

1.92

10

C20ST0800

800

2.52

10

C20ST1000

990

3.09

10

C20ST1200

1160

3.60

10

The Super panels have two parallel cuts with angles of 45 degrees and are joined to the Standard panels which allow the ducts to be built up to 2.000 mm or for  not standard size ducts according to project needs.

length 3.000 mm - thickness 20 mm

CODE

MISURA

  Int. (mm)

M²/Pz.

  Lit./pz  

 euro/pz 

Pz.

C20SU0200

200

0.66

10

C20SU0400

400

1.26

10

C20SU0600

600

1.86

10

C20SU0800

800

2.46

10

The Special panels are characterized by a cut of 45 degrees on one side and a cut of 90 degrees on the other side in order to facilitate the construction of every size and range elbows and special fittings of ducts if used together with any other Praktico panels

length 3.000 mm - thickness 20 mm

CODE

MISURA

  Int. (mm)

M²/Pz.

  Lit./pz  

 euro/pz 

Pz.

C20SP0300

280

0.90

10

C20SP1200

1198

10

Natural aluminium profile in several sized forecut bars, made to join ducts reducing to lower levels the losses due to air leakages without gaskets. To use together with PVC "H" bayonet.

CODE

MISURA

(mm)

u.m

 euro/pz 

Comf.

C50FG0150

150

n.

20

C50FG0200

200

n.

20

C50FG0250

250

n.

20

C50FG0300

300

n.

20

C50FG0400

400

n.

20

C50FG0500

500

n.

20

C50FG0600

600

n.

20

C50FG0800

800

n.

20

C50FG1000

990

n.

20

C50FG1200

1160

n.

20

C50FG1400

1360

n.

20

C50FG1600

1560

n.

20

C50FG1800

1760

n.

20

C50FG2000

1960

n.

20

Natural aluminium profile made to connect tee branches to main duct. To use together with invisible flange and PVC "H" bayonet.

CODE

MISURA

 (mm)

u.m.

 euro/m 

Conf.

C50PFS002

4000

m

-

40

PVC profile in several sized bars, made to join invisible flanges and/or tee branch flanges. It reduce losses of air leakages without gaskets.

CODE

MISURA

 (mm)

u.m..

 euro/pz 

Conf.

C50BA0150

150

n.

-

10

C50BA0200

200

n.

-

10

C50BA0250

250

n.

-

10

C50BA0300

300

n.

-

10

C50BA0400

400

n.

-

10

C50BA0500

500

n.

-

10

C50BA0600

600

n.

-

10

C50BA0800

800

n.

-

10

C50BA1000

990

n.

-

10

C50BA1200

1160

n.

-

10

C50BA1400

1360

n.

-

10

C50BA1600

1560

n.

-

10

C50BA1800

1760

n.

-

10

C50BA2000

1960

n.

-

10

Natural aluminium profile made to connect ducts to air unit or create inspection doors, fire dampers, etc.

CODE

MISURA

 (mm)

u.m

 euro/m 

Conf.

C50PRS001 

4000

m

-

40

Natural aluminium profile made to connect ducts to dampers, anti vibration joints, fire dampers, inspection doors, etc.

CODE

MISURA

 (mm)

u.m

 euro/m 

Conf.

C50PRU001 

4000

m

-

40

Natural aluminium profile made to install ventilation grill in walls or ceilings.

CODE

MISURA

 (mm)

u.m.

 euro/m 

Conf.

C50PRB001 

4000

m

-

40

Natural aluminium profile made to connect the ducts to level surfaces, air unit, fire dampers, etc.

CODE

MISURA

 (mm)

u.m.

 euro/m 

Conf.

C50PRF001 

4000

m

-

40

Natural aluminium tubolar profile built  for duct reinforcement. Inside tongues allow self flexed screws fixing.

CODE

MISURA

 (mm)

u.m

 euro/m 

Conf.

C50RNF001 

4000

m

-

40

Easy and handy cutter with ergonomic handle and reclining base. It allows to cut the panel exactly at 90 degrees, left-45 degrees and right-45 degrees using the same cutter.

CODE

U.M.

 euro/pz 

Conf.

C54TGC000 

n.

-

1

Simple Windows application that allows the formulation of orders in an easy and quickly way, but also the formulation of  lists of material, work sheets and operating time evaluation.

CODE

U.M.

 euro/pz 

Conf.

C60ESY000 

n.

-

1

TEMPLATE

A simple and useful aluminium tool used for a fast and exact construction of 90 degrees elbow curves. It displays a sinoptic table which measures the limits of the elbow curves depending on the size of duct.

CODE

U.M.

 euro/pz 

Conf.

C54DMA000  

n.

-

1

Aluminium sheet collar, 150 mm in height, made to connect round flexible ducting to main ducts.

CODE

^{Ø (mm)}

U.M.

euro/Pz.

Conf.

C51CRA100 

100

N.

10

C51CRA150 

150

N.

10

C51CRA200

200

N.

10

C51CRA250

250

N.

10

C51CRA300

300

N.

10

C51CRA350

350

N.

10

Zinc coated steel sheet and polyester PVC tissue anti - vibration joint. Usable width 150 mm.

CODE

U.M.

 euro/m. 

Conf.

C51GNT001

m.

-

40

Zinc coated steel profile necessary for the anti-vibration joint connection. Sectional bar: 4 m.

CODE

MISURA (mm)

U.M.

euro/m

Conf.

C51GNT002

4000

m.

-

20

Zinc coated angle, for the anti-vibration joint installation.

CODE

U.M.

euro/n

Conf.

C51GNT003

N.

-

100

Flexible tube made with PVC tube interior piping insulated with 25 mm glass wool, coated with a PVC grey colour tissue exterior protection.

CODE

^{Ø (mm)}

U.M.

euro/m

m/Conf.

C51PVI100 

102

m.

6

C51PVI150 

152

m.

6

C51PVI200

203

m.

6

C51PVI250

254

m.

6

C51PVI300

304

m.

6

C51PVI350

356

m.

6

Flexible tube made with polyester tissue, applied to a grey PVC and to an helical spiral harmonic steel wire.

CODE

^{Ø (mm)}

U.M.

euro/m

m/Conf.

C51PVC100 

102

m.

6

C51PVC150 

152

m.

6

C51PVC200

203

m.

6

C51PVC250

254

m.

6

C51PVC300

304

m.

6

C51PVC350

356

m.

6

Nylon covering angle made to improve the external appearance of invisible flange joint angle.

CODE

U.M.

euro/n

n/Conf.

C50PFS004

N.

-

200

Nylon covering angle made to improve the external appearance in the joint made with "chair" profile.

CODE

U.M.

euro/n

n/Conf.

C50PRS002 

N.

-

200

Grey nylon reinforcemnet angle, made to stiffen the duct corner and to improve external appearence of the joint made with traditional system.

CODE

U.M.

euro/n

n/Conf.

C50PFT003 

N.

-

200

Zinc coated 12/10 thick steel angle sheet, made to be inserted under the profiles at the angle of connection as reinforcement and for the best duct squaring.

CODE

U.M.

euro/n

n/Conf.

C50SQZ001

N.

-

500

Aluminium disk made for the reinforcement profile installation in order to distribute the load on a larger surface. Diameter 90 mm.

CODE

U.M.

euro/n

n/Conf.

C50RNF002 

N.

-

100

Zinc coatec self tapping screw, with 6.3x4.5 mm hexagonal head. Suitable for vibration damping joints fastering, dampers, reinforcement profile, splinters, etc.

CODE

U.M.

euro/n

n/Conf.

C50RNF003 

N.

-

200

Grey liquid waterproofing sheath, with the best resistance characteristic to the atmospheric agents. Aply by rull or brush on dry and clean surfaces. To obtain the best waterproofing, use 0.5/0.8 lt/m2.

CODE

euro/lit.

Conf. da Lt

C50IMP020

-

20

Ultra-rapid cyano-acrilic glue for aluminium and PVC profiles, very useful on construction site also at low temperatures.

CODE

U.M.

Conf. da gr

euro

Conf.

C50CLA050 

N.

50

-

1

C50CLA500 

N.

500

-

1

Polyurethane glue, useful for sticking together PVC and aluminium profiles at temperatures not inferior to 10° C. It reacts with atmospheric humidity within about three ours.

CODE

U.M.

Conf. da gr

euro

Conf

C50CLF050

N.

500

-

1

Specific glue to obtain the best adhesion between foam polyisocyanurates. To get best adhesion it is necessary to wait about 15-20 minutes after spreading the glue onto the surfaces by mean of a simple paintbrush at temperatures not lower than 10 C.

CODE

U.M.

€/Kg

Conf.

C50CLS005

Kg

5

C50CLS015

Kg

15

Sealing silicone, one component, on acetic base, presenting the best adhesion and ageing resistance characteristic (cod. SA0310). Available also with anti-fungus to prevent growth of moulds (cod. SB0310). 310 ml.

CODE

Colore

U.M.

€

Conf.

C50SIL001

alluminio

N.

-

24

H 75 mm ALUMINIUM TAPE

Aluminium adhesive tape available in 45 m rolls, 40 or 50 microns thickness, along with protective liner of silicon paper that has to be taken off before using. Apply on dry, dust free, greasy free, silicon free surfaces at a temperature of not less than 10° C.

CODE

U.M.

€

Conf.

C50NST051

50 micron 

N.

16

C50NST041 

40 micron

N.

16

Self-adhesive gasket in tender acrylic foam, suitable to reduce air leakages in the connection joints. Size 10 mm x 10 mm x 2000 mm.

CODE

dimensioni

(mm)

U.M.

€

Conf.

C50GRN001

10x10x2000

m

-

100